TP-LINK CPE210 V3.2 Access Point Wi‑Fi 4 Single Band (2.4GHz) για Εξωτερική τοποθέτηση

TP-LINK CPE210  Access Point Wi‑Fi 4 Single Band (2.4GHz) για Εξωτερική τοποθέτηση

Βασικά χαρακτηριστικά:

• 802.11 b/g/n
• Single Band (2.4GHz)
• Μέγιστη Ταχύτητα WLAN: 300 Mbps
• Ταχύτητα LAN: 100 Mbps
• Wi‑Fi 4
• Θύρες RJ45: 2

Gain (Max)  9 dBi



Specification:

TL-CPE210
Procesor	Qualcomm Atheros 560 MHz, MIPS 74Kc
Memory	64 MB DDR2 RAM 8 MB Flash
Ports	1 shielded Ethernet 10/100 Mb / s port (LAN0, passive PoE) 1 grounding terminal
Power	Passive PoE via LAN0 (+4.5 pin, -7.8 pin) Voltage: 16 - 27 V DC
Dimensions	224x79x60 mm
	10.5 W maximum Note: when using passive PoE, power consumption may be higher depending on the cable length
Antenna type	Built-in, dual polarized 9 dBi directional antenna, 2x2 Beam width: 65 ° (in H plane) / 35 ° (in E plane)
Protection	Protection against electrostatic discharge 15 KV 6000 V lightning protection
Housing	Outdoor ASA stabilized plastic IPX5 certificate
Wireless transmission properties
Standardy bezprzewodowe	IEEE 802.11b IEEE 802.11g IEEE 802.11n
Patented protocol	TDMA mode (with Pharaos MAXtream enabled)
Wireless network speed	Up to 144.4 Mb / s (20 MHz, dynamic) Up to 72.2 Mb / s (10 MHz, dynamic) Up to 36.1 Mb / s (5 MHz, dynamic)
Wireless network speed	2,4 - 2,483 GHz Note: Available frequencies may vary depending on the region selected
Receiver sensitivity	802.11b: 11M: -95dBm, 5,5M: -96dBm, 2M: -96dBm 1M: -96dBm 802.11g: 54M: -79dBm, 48M: -80dBm, 36M: -84dBm 6-24M: -88dBm 802.11n: MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm MCS0: -96dBm
Transmission power	27 dBm /500 mw (power can be changed with an accuracy of 1 dBm) Note: the maximum transmission power may vary depending on the region selected
Software features
Wireless network configuration	Pharos MAXtream TDMA technology 802.11b / g / n modes Channel width: 5/10/20/40 MHz Automatic channel selection Transmission force control Dynamic frequency selection (DFS) Enable / disable WDS WPA / WPA2, WPA-PSK / WPA2-PSK (AES / TKIP), 64/128/152 WEP security Enable / disable SSID broadcast Multi-SSID with VLAN tagging (only in AP mode) Distance / ACK timeout settings Filtering by MAC addresses Advanced WiFI settings: Beacon interval / RTS threshold / Fragmentation threshold / DTIM interval / AP isolation / short GI / multimedia WiFi
Management	Device detection and management by Pharos Control Web management via HTTP / HTTPS System log SNMP agent (v2c) Ping watch dog Dynamic DDNS SSH server
System Tools	Wireless signal quality indicators Signal strength / noise / CCQ transmission / processor / memory Monitors: bandwidth / stations / ARP / routes / WAN / DHCP Spectrum analysis Speed test ping traceroute
System optimizations	IGMP Snooping / proxy optimized for multicast applications Hardware watch dog
PoE adapter properties
Ports	1 power plug with ground 1 shielded 10/100 Mb / s Ethernet port (power supply + data)
Efficiency	> 80%
buttons	Remote reset
Certifications	CE / FCC / UL / IC / GS / PSB / C-tick / SAA / S-Mark / KC-mark
LED status	0 - 0,8 A: green 0,8 - 1 A: red
Output	24 V DC, 1 A +4,5pin; -7.8 pin (PoE supply, range up to 60 meters)
Input Voltage	100 - 240 V AC przy 50 / 60 Hz
Dimensions	110x57x33,5 mm
Input current	Maksymalnie 0,8 A przy 100 V AC
NOutput voltage	24 V DC
Other
Certyfikations	CE, FCC, RoHS, IPX5
Contents of the package	CPE210 24 V 1 A passive PoE adapter Mounting straps Power cord Quick Installation Guide
System requirements	Microsoft Windows 98SE, NT, 2000, XP, Vista, 7 OR 8 MAC OS NetWare UNIX OR Linux We recommend using Google Chrome, Safari and Firefox
Working environment	Permissible operating temperature: -30 to 70 degrees Celsius Permissible storage temperature: -40 to 70 degrees Celsius Permissible air humidity: 10% -90% non-condensing Permissible storage humidity: 5% -95% non-condensing